How to dry the wet electric roller- Drying treatment method attached

　　As we all know, electric rollers are usually used indoors. In such an environment all the year round, electric rollers are easy to get damp. If they are not dried in time, it is easy to cause equipment corrosion or short circuit. So what are the methods of electric drum drying for moisture?

1. Excitation coil drying method: the excitation coil is wound on the iron core of the stator coil of the electric drum to make the stator produce flux linkage and dry the motor stator by its iron loss.

2. Electric welding machine drying method: it is necessary to connect the terminals of the damp electric drum winding in series, and use the electric welding machine for heating or drying.

3. External heat source heating method: the damped roller needs to be disassembled and then externally heated to remove the damped part and then installed.

The purpose of drying the electric roller is to keep the electric roller in a dry working environment. Each treatment method is different but the purpose is the same. Therefore, it is not necessary to use a different drying method, as long as the electric roller can be dried.