Causes of conveyor drum failure and treatment measures

　　When using the conveyor drum, we should carry out regular maintenance, operation and inspection of the equipment to ensure the normal use of the internal components of the drum, and avoid the loss caused by aging of the components, especially the failure, which will affect the use of the equipment. In this case, we must find out the cause of the failure and solve it in a timely manner.

1. Check whether the brake discs on both sides of the conveyor drum are normal. If it is abnormal, repair or replace the brake disc.

2. Whether the air pressure is normal. If it is abnormal, check whether the air pump is abnormal or whether the air pipe is leaking or blocked.

3. Check whether the switching program of the braking system controlling the conveyor drum is faulty and whether the transmission of the braking system command is not smooth. The system needs to be reset.

4. For friction brake, check whether the friction band is loose and whether the friction coefficient is reduced. If there is a problem, it needs to be adjusted or replaced.

5. Check whether the brake system of the conveyor drum is damaged. If it is damaged, adjust or replace it.

When the conveyor drum fails to work, it should be repaired according to different reasons. The reasons for the failure of different types of conveyor drum will be different.